` Lighted Windsocks
BDS SYSTEMS INC.
LIGHTED WINDSOCK
Model 700 Series

ACCIDENTS CAN HAPPEN AT NIGHT AS WELL AS DURING THE DAY
KNOW THE DIRECTION AND VELOCITY OF WIND DAY & NIGHT

thumbnail

FEATURES
  • Ready for Installation - Easy to install - No maintenance
  • Bright-white LED's shine into the windsock at night - Automatically turn ON at dusk, OFF at down (sunset to sunrise)
  • No AC power is required on solar powered units. A solar panel charges a battery during daylight hours
  • Wind direction and wind velocity are visible at night as well as during the day
  • LED's are automatically turned ON at dusk, OFF at dawn (sunset to sunrise)
  • Windsock frame with ball bearing hubs rotates freely - 360 degrees
  • LED light assembly mounts on center cylinder and does not restrict air flow
  • Heavy duty construction - all welded 304 stainless steel frame
  • AC powered units available. An AC Control Unit is required for assemblies with a DC powered top beacon
  • Top mounted obstruction light or FAA approved lights available - Optional, C/F
  • Operating times can vary by installation location and local weather conditions
  • Reliable, Flexible, Safe - LED's last up to 100,000 hours (10+ years), no light bulbs to change
  • Aids emergency personnel, the public, and pilots when wind direction and velocity are important
OPERATION
The Model 735 Lighted Windsock consists of three parts: (1) Lighted Windsock Frame assembly (2) Control Unit for providing DC power to the windsock light/s (3) windsock. The light assembly mounted on the windsock frame shines a beam of light into the throat of the windsock. The control unit supplies power to the light assembly in the frame and controls the ON and OFF times the light is illuminated. As the wind direction and wind velocity change, the windsock and frame rotate 360 degrees showing the direction and velocity of the wind.
The Solar Powered Lighted Windsock is supplied with a Solar Powered Control Unit (SPCU). The solar panel charges a battery during daylight hours. Control electronics automatically control the LED's ON/OFF times and the different lighting control options available. The standard factory set flash pattern for the LED lights is 2 seconds ON, and 2 seconds OFF. The standard setting for appling power to the LED lights is ON at sunset and OFF at sunrise. Other field programmable flash patterns are available. These setting are sellected depending on the average daytime light available in the location where the lighted windsock is to be installed.
The AC Powered Lighted Windsock is supplied with an AC Control Unit (ACCU). We offer two units for controlling the LED lights. A PhotoControl and a Digital Timer. The photocontrol automatically applies power to the windsock light/s from dusk to dawn. The timer can be programmed for many different ON and OFF times during installation and can be installed inside. Because power is always available, the windsock LED's can be set for steady burn - continuously ON at night. The AC Control Unit also suppled power to a top beacon when a top beacon is ordered. All DC top beacons require an AC Control Unit. Consult factory for other operating options.
The Lighted Windsock is designed to alert personnel of changing wind conditions day and night. This product is for installation at chemical, petroleum, pharmaceutical, nuclear, waste-treatment plants, at airports, hospitals, off-shore platforms, government, military, industrial facilities, or anywhere where wind direction is important.
SPECIFICATIONS- Model 735 Series Windsock
    WINDSOCK FRAMES - 18" diameter
      WINDSOCK FRAME ASSEMBLY with light - Model 735LWF (Windsock frame with light ONLY)
      • Light output intensity >430 candelas - LED's life span up to 100,000 hours
      • Lights are automatically turned ON at dusk and OFF at down. (Sunset to sunrise); other settings available
      • Seventy-one (71) bright-white LED's shine into windsock; Other lights and colors available
      • Solar powered units flash pattern 2 second ON, 2 second OFF; other flash patterns available
      • Special power transfer device mounted inside frame assembly transfers power to lights. No mercury
      • Heavy duty construction with ball bearing end hubs, all 304 welded Stainless Steel frame. Top rain cap
      • Windsock mounting ring offset from ball bearing hubs approximately 11 inches
      • Windsock light assembly mounts on center cylinder and does not restrict air flow
      • Twelve (12) feet of interconnect wiring is supplied from windsock light/s to Control Unit
      • Mounting pipe (14 gauge) 1" OD X 21.5" with mounting bolts and top end threaded for top beacon when ordered
      • Dimensions: 21.5 X 18 X 14 inches (54.88 x 45.72 x 35.56 cm)
      • Net weight: 8 pounds (3.62kg) Does not include main mounting support pipe supplied "By Others"
      WINDSOCK FRAME ASSEMBLY with light and Top Beacon - Model 735LWF-CTB
        Ditto Model 735LWF except with Carmanch 601 solar powered red LED top beacon light assembly. Installed on mounting pipe above windsock frame. Model 720LWF-CTB
      WINDSOCK FRAME ASSEMBLY with light and Top Beacon - Model 735LWF-WTB
        Ditto Model 735LWF except Super bright, 360 degrees, red LED top beacon light assembly. Twelve field selectable flash patterns. Installed on mounting pipe above windsock frame. Model 720LWF-WTB
      WINDSOCK FRAME ASSEMBLY with light and Top Beacon - Model 735LWF-WFAA
        Ditto Model 735LWF except FAA approved aircraft anti-collision red LED top beacon light assembly. Unit has 30 bright lights that flash ON and OFF (approx. 0.25 seconds ON, 1.25 seconds OFF). Installed on mounting pipe above windsock frame. Model 720LWF-WFAA
      WINDSOCK FRAME ASSEMBLY with light and Top Beacon - Model 735LWF-DFAA
        Ditto Model 735LWF except with an FAA approved red LED Obstruction top beacon light assembly. The red LED top beacon operates as a steady burn. Installed on mounting pipe above windsock frame. Model 735LWF-DFAA

    CONTROL UNITS
      CONTROL UNIT with solar panel - Model 735SPCU
      • Solar panel 20 watt, field adjustable tilt (0 to 90 degrees) and horizontal rotation
      • Solar panel mounting kit with SS straps for mountint to windsock support pipe
      • wiring bewteen solar panel and control unit included
      • Battery 12 volt, 12Ah sealed rechargeable lead-acid
      • Solar lighted "controller" controls when power is applied to lights
      • Standard factory lighting control settings; ON at sunset, OFF at sunrise
        Ten (10) different power lighting options available
      • Terminal strip for wiring connections
      • SS U-Bolts/straps for mounting enclosure and solar panel to 1" pipe provided
      • Battery charging and low voltage disconnect status LED's - standard
      • Battery charging is dependent on installation location and local weather conditions
      • Enclosure fiberglass with hinged cover NEMA 4X suitable for outdoor or indoor installations
      • Enclosure mountint plate with mounting hardware included
      • Dimensions: (Solar Panel). 21 X 17 X 4 inches (53.34 x 43.18 x 10.36 cm)
      • Weight: 10 pounds (4.53kg) Does not include mounting support pipe supplied "By Others")
      • Dimensions: (Control Unit) 13 X 9 X 6.5 inches (33.02 x 22.86 x 16.51 cm)
      • Weight: 15 pounds (6.8kg). Does not include mounting support pipe supplied "By Others")
      CONTROL UNIT requiring an AC power source - Model 735ACCU
      • AC/DC Open frame power supply. Input: 90-264VAC, 47-63Hz; Output: 12VDC, 60 watt
      • Photocontrol unit (PC) controls the (ON/OFF) time power is applied to the windsock light/s - Dusk to Dawn. ACCU(PC)
      • Digital Timer unit (DT) controls the (ON/OFF) times, as programmed, for when power is applied to the windsock light/s. (Optional) ACCU(DT)
      • Terminal strip for wiring connections
      • Enclosure mounting hardware for installation on a flat surface
      • Enclosure fiberglass with hinged cover NEMA 4X suitable for outdoor installation.
      • Dimensions: 12 X 5 X 4.75 inches (30.48 x 12.7x 12.07 cm)
      • Weight: 3 pounds (1.59kg) Does not include mounting support pipe supplied "By Others"
      • The same enclosure is use for both the ACCU(PC) and ACCU(DT). On the ACCU(PC) unit the photocontrol is mounted on the outside of enclosure.
      WINDSOCK - International Orange Nylon - Windsocks
      • C421IO, Int'l Orange, 18" X 5'0" X 8" (Mouth, Body length, Tail)
      • C422IO, Int'l Orange, 18" X 8'0" X 8" (Mouth, Body length, Tail)
      How to order: (windsock frames and the control units are seperate items)
      • Specify (a) Model 735LWF Standard lighted windsock frame. (b) Model 735SPCU - Solar Powered Control Unit.
      • Specify (a) Model 735LWF Standard lighted windsock frame. (b) Model 735ACCU - AC Control with PhotoControl (PC) or Digital Timer (DT).
      • Specify (a) Model 735LWF-CTB Lighted windsock frame w/Top Beacon. (b) Model 735SPCU - Solar Pwr'd Control Unit.
      • Specify (a) Model 735LWF-WTB Lighted windsock frame w/Top Beacon. (b) Model 735ACCU - AC Control Unit with PC or DT.
      • Specify (a) Model 735LWF-WFAA Lighted windsock frame w/Top Beacon. (b) Model 735ACCU - AC Control Unit with PC or DT.
      • Specify (a) Model 735LWF-DFAA Lighted windsock frame w/Top Beacon. (b) Model 735ACCU - AC Control Unit with PC or DT.
      • Specify windsock C421IO or C422IO. Windsocks are always a separate line item Windsocks
      • Orders shipped on a customers account number are subject to a BDS handling charge.
    Specifications subject to change without notice.
    BDS history windsock frames - BDS history windsock frames
    Sample Lighted Windsock specifications - Sample Lighted Windsock Specifications
    Sample Lighted Windsock Top Beacon specifications - Sample Lighted Windsock Top Beacon Specifications
    Installation Guide and User Notes - Installation Guide and User Notes
    Pictures of our Lighted Windsock at night - Pictures of our Lighted Windsock at night
    Return to: Top of Page / BDS Products / BDS Systems Home Page / email: bruce@bdssystems.com